Stable Stepper User Guide

Thank you for choosing the Stable Stepper.

Please read this guide completely before using your Stable Stepper.

What's Included

Your package includes:

• 1 Stable Stepper

• Online Instruction Guide (QR Code/Link)

Before You Begin

Before each use:

• Inspect the Stable Stepper for signs of wear or damage.

• Make sure all stitching, attachment points, and resistance bands are secure.

• Only use the Stable Stepper on treadmills equipped with front handrails.

• Ensure the treadmill is completely stopped before installing or removing the Stable Stepper.

• Remove any loose clothing or accessories that could become caught.

Installation Instructions

Step 1 — Position the Belt

Place the padded belt around your waist with the padded section positioned comfortably against your lower back.

Adjust the belt as needed for a comfortable fit before attaching the resistance bands to the treadmill.

Step 2 — Attach to the Treadmill

Attach each resistance band to the front treadmill handrails only.

The bands should always be installed in an X formation.

This means:

• The left side of the belt connects to the right front handrail.

• The right side of the belt connects to the left front handrail.

The crossed X configuration is the intended installation method.

Never attach the Stable Stepper to:

• Side handrails

• Rear treadmill frame

• Safety key

• Moving components

• Any object other than the front handrails

Step 3 — Check Your Setup

Before starting:

• Confirm both attachment points are fully secured.

• Verify the resistance bands form a clear X shape.

• Make sure the belt is positioned correctly.

• Step onto the treadmill before turning it on.

Using the Stable Stepper

1. Stand centered on the treadmill.

2. Start at a slow walking speed.

3. Gradually increase speed as comfortable.

4. Allow the resistance bands to provide guidance during your workout.

5. Maintain a natural stride.

6. Avoid leaning excessively forward or backward.

7. Keep the resistance bands crossed in the X formation throughout your workout.

Avoid leaning or moving too far forward during use. Excessive forward movement may cause the support belt to shift position or fall out of place.

Tips for Best Performance

• Position the belt comfortably with the padded section against your lower back.

• Keep the resistance bands evenly tensioned.

• Maintain an upright posture.

• Allow your arms to move naturally.

• Increase treadmill speed gradually.

• Always verify the X formation before beginning your workout.

• Avoid excessive forward movement that may cause the support belt to shift or fall.

Safety Information

Read and follow all warnings before use.

Do not use the Stable Stepper if:

• Any strap, stitching, or attachment point is damaged.

• The resistance bands show signs of excessive wear.

• Any component appears loose or compromised.

• The product has been modified.

Always:

• Inspect the Stable Stepper before every workout.

• Start at a low speed.

• Stop immediately if anything feels unsafe.

• Exit the treadmill before removing the Stable Stepper.
  

Do not:

• Attach the Stable Stepper to anything other than the front handrails.

• Use on damaged treadmills.

• Use as a suspension harness or fall-arrest device.

• Jump while wearing the Stable Stepper.

• Allow children to use the product without adult supervision.
  

Cleaning & Maintenance

After use:

• Wipe with a damp cloth.

• Allow to air dry completely.

• Store in a cool, dry location.

• Avoid prolonged exposure to direct sunlight.

• Do not machine wash.

• Do not bleach.

• Do not tumble dry.